Root Samsung Galaxy S5 Mini SM-G800R4

Root Galaxy S5 Mini SM-G800R4. Galaxy S5 Mini is a 4.5-inch screen with 720 x 1280 pixels resolution, running on Android 4.4.2 KitKat,Samsung Exynos 3 Quad 3470 chipset and 1.4GHz ARM Cortex-A7 processor.

Rooting enables you to install apps which require root access, however rooting voids warranty of your device. To regain warranty you will have to install official firmware.

For rooting CF-Auto-Root Package is used.

The guide mentioned below is only for Galaxy S5 Mini SM-G800R4 running on official firmware and  cannot be tried on any other device.To know the model number of your device go to Settings >> About Phone.

We cannot be held liable of any damage done to your device while following the below mentioned procedure.

galaxy s5 mini

Root Samsung Galaxy S5 Mini SM-G800R4

Take a complete backup of data,apps and settings as the procedure may wipe your data.

Make sure that the battery of device has a minimum charge of 60%.

Enable “USB debugging” on your device by going to Settings >> Developer options >> Enable USB debugging.

Download Kies Software to install drivers.

Download CF-Auto Root for Galaxy S5 Mini SM-G800R4 (

Download Odin (

Extract the Firmware file which you have downloaded in above step. You will get “.tar” file along with other files.

You will get “.tar.md5” file.

Extract Odin to get “Odin3 v3.09.exe” file.

Switch off device.

Boot device into download mode. Press and hold Volume Down, Home, Power till device turns on and then press Volume Up to enter download mode.

Connect device to computer using USB cable. Odin will detect your device and ID:COM will turn yellow and a message appears saying “Added”. Re-install drivers if Odin fails to detect device.

Click on “PDA button” in Odin and navigate to select “Click on “PDA button” in Odin and navigate to select “.tar.md5″ file which you have downloaded.

In Odin make sure that “Auto Reboot” and “F.Reset Time” are selected and “Re-Partition” check box is unchecked.

Click on Start button in Odin to start rooting. When flashing is complete you will get a PASS message.

Disconnect device from your computer and let it boot automatically

Leave a Reply