Install J320HXXU0APB7 Android 5.1.1 Lollipop firmware on Galaxy J3 (2016) J320H

Install Samsung Galaxy J3 (2016) J320H with the latest J320HXXU0APB7 Android 5.1.1 Lollipop firmware. The latest XXU0APB7 Android 5.1.1 firmware can be download OTA or via Kies software, you can also install the firmware manually on your device.

Odin is used to flash the firmware on Galaxy J3 (2016) J320H.

Firmware details:

Model SM-J320H
Model name Galaxy J3
Country Saudi Arabia
Version Android 5.1.1
Changelist 101969629
Build date Thu, 11 Feb 2016 14:00:45 +0000
Product code WTL

The guide mentioned below is only for Galaxy J3 (2016) J320H and is not compatible with any other device. To know the model number of your device go to Settings >> About Phone.

We cannot be held liable of any damage done to your device while following the below mentioned procedure.

Install official  J320HXXU0APB7 Android 5.1.1 Lollipop firmware on Galaxy J3 (2016) J320H

Take a complete backup of data,apps and settings as the procedure may wipe your data.

Make sure that the battery of device has a minimum charge of 60%.

Enable “USB debugging” on your device by going to Settings >> Developer options >> Enable USB debugging.

Download Android 5.1.1 J320HXXU0APB7 and download Odin (

Extract the Firmware file which you have downloaded in above step. You will get “.tar” file along with other files.

Extract Odin to get “Odin3 v3.09.exe” file.

Switch off device.

Boot device into download mode. Press and hold Volume Down, Home, Power till device turns on and then press Volume Up to enter download mode.

Connect device to computer using USB cable. Odin will detect your device and ID:COM will turn yellow and a message appears saying “Added”. Re-install drivers if Odin fails to detect device.

Click on “PDA button” in Odin and navigate to select “.tar″ file which you have downloaded.

In Odin make sure that “Auto Reboot” and “F.Reset Time” are selected and “Re-Partition” check box is unchecked.

Click on Start button in Odin to start flashing Android 5.1.1 firmware. When flashing is complete you will get a PASS message.

Disconnect device from your computer and let it boot automatically.

XXU0APC2 Android 5.1.1 Lollipop firmware on Galaxy J3 (2016) J320H is now installed. You can check firmware version by going to Settings >> About Phone


Leave a Reply