Install G903FXXU1BPE1 Android 6.0.1 Marshmallow firmware on Galaxy S5 Neo G903F

Update Samsung Galaxy S5 Neo G903F to the latest G903FXXU1BPE1  Android 6.0.1 Marshmallow firmware. You can update Galaxy S5 Neo G903F to the latest FXXU1BPE1 firmware by connecting your device with Samsung KIES or via OTA update notification. Go through the guide to manually update Galaxy S5 Neo G903F to the latest G903FXXU1BPE1  Android 6.0.1 Marshmallow.

Odin is used to flash the firmware on Galaxy S5 Neo G903F.

The guide mentioned below is only for c G903F and is not compatible with any other device. To know the model number of your device go to Settings >> About Phone.

Firmware Details:

Model SM-G903F
Model name G903F
Country South East Europe
Version Android 6.0.1
Changelist 8117265
Build date Tue, 17 May 2016
Product code SEE

Install G903FXXU1BPE1   Android 6.0.1 Marshmallow firmware on Galaxy S5 Neo G903F

Take a complete backup of data,apps and settings as the procedure may wipe your data.

Make sure that the battery of device has a minimum charge of 60%.

Enable “USB debugging” on your device by going to Settings >> Developer options >> Enable USB debugging.

Download Kies Software to install drivers.

Download Android 6.0.1 G903FXXU1BPE1   update for the Galaxy S5 Neo G903F.

and Odin (

Extract the Firmware file which you have downloaded in above step. You will get “.tar” file along with other files.

Extract Odin to get “Odin3 v3.09.exe” file.

Switch off device.

Boot device into download mode. Press and hold Volume Down, Home, Power till device turns on and then press Volume Up to enter download mode.

Connect device to computer using USB cable. Odin will detect your device and ID:COM will turn yellow and a message appears saying “Added”. Re-install drivers if Odin fails to detect device.

Click on “PDA button” in Odin and navigate to select “.tar″ file which you have downloaded.

In Odin make sure that “Auto Reboot” and “F.Reset Time” are selected and “Re-Partition” check box is unchecked.

Click on Start button in Odin to start flashing Android 6.0.1 firmware. When flashing is complete you will get a PASS message.

Disconnect device from your computer and let it boot automatically.

You have installed official G903FXXU1BPE1  Android 6.0.1 Marshmallow on Galaxy S5 Neo G903F. To know the firmware version go to Settings >> About Phone


Leave a Reply