Install ClockworkMod Recovery For Motorola RAZR i

Motorola RAZR i users can now install ClockworkMod recovery for their device, thanks to XDA Senior Member turl1. You can now install Custom ROM. Motorola RAZR i has a 4.3 inch super AMOLED Advanced capacitive touchscreen running on Android 4.0 ICS.

The guide mentioned below is only for Motorola RAZR i and cannot be tried on any other device.

We cannot be held liable of any damage done to your device while following the below mentioned procedure.

Install ClockworkMod Recovery for Motorola RAZR i

Take a complete backup of data,apps and settings as the procedure may wipe your data.

Make sure that the battery of device has a minimum charge of 60%.

Enable “USB debugging” on your device by going to Settings >> Developer options >> Enable USB debugging.

Bootloader of your device should be unlocked. You can go through the guide here to unlock bootloader.

Download Fastboot from here ( and CWM recovery from here (recovery-razri-try9touch.img).

Extract “ file” to C:\ of your computer where you will get a folder named “Fastboot”. Copy “recovery-razri-try9touch.img” file which you downloaded to “Fastboot” folder.

Switch off device and enter in fastboot mode. Enter into the Boot Mode Selection mode by holding down the Vol Up, Vol Down and Power buttons. By selecting Power buttons enter Fastboot Mode.

Connect device to computer using USB cable and open Command Prompt on your computer.

In fastboot loader folder enter command-

cd C:\Fastboot

Now, enter command – fastboot devices which will detect your device.

To flash CWM recovery on your device enter-

fastboot flash recovery recovery-razri-try9touch.img

Type command fastboot reboot-bootloader to reboot device into Bootloader Mode and then select recovery to reboot into ClockworkMod recovery.

ClockworkMod recovery is installed on Motorola RAZR i.


Leave a Reply

Your email address will not be published. Required fields are marked *